サーバーのよく使うコマンドメモ| ssh

Summery

サーバーのターミナルにコマンドでログインすることができる。 サーバーからアクセスできるセグメント内のサーバーには、ポートさえ繋がっていれば踏み台にして、いくつも経由してログインすることが可能になる。

Construction

$ ssh [option] [*user]@[host] [command]

Option

-i [key] : ローカルにある秘密鍵を指定 -l : ログインユーザーを指定 -p : ポート番号の指定（デフォルト:22） -1 : プロトコルバージョン１を使用 -2 : プロトコルバージョン２を使用 -4 : IPv4を使用 -6 : IPv6を使用 -A : フォワリングを有効 -a : フォワリングを無効 -L : フォワリングの際にローカルで使用するポート -X : X11を有効 -x : X11を無効

Sample

# hoge.comにログイン $ ssh hoge.com # hoge.comのuserアカウントでログイン $ ssh user@hoge.com $ ssh -l user hoge.com # hoge.comサーバーに秘密鍵でログイン $ ssh -i ~/common/hoge.txt hoge,com # hoge.comサーバーでlsコマンドを実行 $ ssh user@hoge.com ls # ポートフォワリングで踏み台接続をする場合 # ※macでfilezillaで、踏み台sftp接続をする場合に使用 $ ssh -L 8000:192.168.1.2:22 root@ideacompo.com $ password ** # 上記認証後、Filezillaで下記設定にて接続が可能になります。 # host:localhost # port:8000 # sftpアクセス ## local -> server1.com -> server2.com の多段アクセス # 簡単に多段SSHを行う方法※ただし鍵の引き渡しはできない $ ssh -t user@server1.com "ssh user@server2.com" > password: # 多段接続かつ鍵も引き継げる $ ssh server2.com -o ProxyCommand="ssh user@server1.com -W %h:%p"

Similar

mosh, sshfs, rsync

Site

http://hydrocul.github.io/wiki/commands/ssh.html

Discription

ssh (SSH client) is a program for logging into a remote machine and for executing commands on a remote machine. It is intended to replace rlogin and rsh, and provide secure encrypted communications between two untrusted hosts over an insecure network. X11 connections and arbitrary TCP ports can also be forwarded over the secure channel. ssh connects and logs into the specified hostname (with optional user name). The user must prove his/her identity to the remote machine using one of several methods depending on the protocol version used (see below). If command is specified, it is executed on the remote host instead of a login shell. The options are as follows: -1 Forces ssh to try protocol version 1 only. -2 Forces ssh to try protocol version 2 only. -4 Forces ssh to use IPv4 addresses only. -6 Forces ssh to use IPv6 addresses only. -A Enables forwarding of the authentication agent connection. This can also be specified on a per-host basis in a configuration file. Agent forwarding should be enabled with caution. Users with the ability to bypass file permissions on the remote host (for the agent's UNIX-domain socket) can access the local agent through the forwarded connection. An attacker cannot obtain key material from the agent, however they can perform operations on the keys that enable them to authenticate using the identities loaded into the agent. -a Disables forwarding of the authentication agent connection. -b bind_address Use bind_address on the local machine as the source address of the connection. Only useful on systems with more than one address. -C Requests compression of all data (including stdin, stdout, stderr, and data for forwarded X11 and TCP connections). The compression algorithm is the same used by gzip(1), and the ``level'' can be controlled by the CompressionLevel option for protocol version 1. Compression is desirable on modem lines and other slow connections, but will only slow down things on fast networks. The default value can be set on a host-by-host basis in the configuration files; see the Compression option. -c cipher_spec Selects the cipher specification for encrypting the session. Protocol version 1 allows specification of a single cipher. The supported values are ``3des'', ``blowfish'', and ``des''. 3des (triple-des) is an encrypt-decrypt-encrypt triple with three dif- ferent keys. It is believed to be secure. blowfish is a fast block cipher; it appears very secure and is much faster than 3des. des is only supported in the ssh client for interoperabil- ity with legacy protocol 1 implementations that do not support the 3des cipher. Its use is strongly discouraged due to crypto- graphic weaknesses. The default is ``3des''. For protocol version 2, cipher_spec is a comma-separated list of ciphers listed in order of preference. See the Ciphers keyword in ssh_config(5) for more information. -D [bind_address:]port Specifies a local ``dynamic'' application-level port forwarding. This works by allocating a socket to listen to port on the local side, optionally bound to the specified bind_address. Whenever a connection is made to this port, the connection is forwarded over the secure channel, and the application protocol is then used to determine where to connect to from the remote machine. Currently the SOCKS4 and SOCKS5 protocols are supported, and ssh will act as a SOCKS server. Only root can forward privileged ports. Dynamic port forwardings can also be specified in the configura- tion file. IPv6 addresses can be specified by enclosing the address in square brackets. Only the superuser can forward privileged ports. By default, the local port is bound in accordance with the GatewayPorts setting. However, an explicit bind_address may be used to bind the connection to a specific address. The bind_address of ``localhost'' indicates that the listening port be bound for local use only, while an empty address or `*' indi- cates that the port should be available from all interfaces. -e escape_char Sets the escape character for sessions with a pty (default: `~'). The escape character is only recognized at the beginning of a line. The escape character followed by a dot (`.') closes the connection; followed by control-Z suspends the connection; and followed by itself sends the escape character once. Setting the character to ``none'' disables any escapes and makes the session fully transparent. -F configfile Specifies an alternative per-user configuration file. If a con- figuration file is given on the command line, the system-wide configuration file (/etc/ssh/ssh_config) will be ignored. The default for the per-user configuration file is ~/.ssh/config. -f Requests ssh to go to background just before command execution. This is useful if ssh is going to ask for passwords or passphrases, but the user wants it in the background. This implies -n. The recommended way to start X11 programs at a remote site is with something like ssh -f host xterm. If the ExitOnForwardFailure configuration option is set to ``yes'', then a client started with -f will wait for all remote port forwards to be successfully established before placing itself in the background. -g Allows remote hosts to connect to local forwarded ports. -I pkcs11 Specify the PKCS#11 shared library ssh should use to communicate with a PKCS#11 token providing the user's private RSA key. -i identity_file Selects a file from which the identity (private key) for public key authentication is read. The default is ~/.ssh/identity for protocol version 1, and ~/.ssh/id_dsa, ~/.ssh/id_ecdsa and ~/.ssh/id_rsa for protocol version 2. Identity files may also be specified on a per-host basis in the configuration file. It is possible to have multiple -i options (and multiple identities specified in configuration files). ssh will also try to load certificate information from the filename obtained by appending -cert.pub to identity filenames. -K Enables GSSAPI-based authentication and forwarding (delegation) of GSSAPI credentials to the server. -k Disables forwarding (delegation) of GSSAPI credentials to the server. -L [bind_address:]port:host:hostport Specifies that the given port on the local (client) host is to be forwarded to the given host and port on the remote side. This works by allocating a socket to listen to port on the local side, optionally bound to the specified bind_address. Whenever a con- nection is made to this port, the connection is forwarded over the secure channel, and a connection is made to host port hostport from the remote machine. Port forwardings can also be specified in the configuration file. IPv6 addresses can be spec- ified by enclosing the address in square brackets. Only the superuser can forward privileged ports. By default, the local port is bound in accordance with the GatewayPorts setting. How- ever, an explicit bind_address may be used to bind the connection to a specific address. The bind_address of ``localhost'' indi- cates that the listening port be bound for local use only, while an empty address or `*' indicates that the port should be avail- able from all interfaces. -l login_name Specifies the user to log in as on the remote machine. This also may be specified on a per-host basis in the configuration file. -M Places the ssh client into ``master'' mode for connection shar- ing. Multiple -M options places ssh into ``master'' mode with confirmation required before slave connections are accepted. Refer to the description of ControlMaster in ssh_config(5) for details. -m mac_spec Additionally, for protocol version 2 a comma-separated list of MAC (message authentication code) algorithms can be specified in order of preference. See the MACs keyword for more information. -N Do not execute a remote command. This is useful for just for- warding ports (protocol version 2 only). -n Redirects stdin from /dev/null (actually, prevents reading from stdin). This must be used when ssh is run in the background. A common trick is to use this to run X11 programs on a remote machine. For example, ssh -n shadows.cs.hut.fi emacs & will start an emacs on shadows.cs.hut.fi, and the X11 connection will be automatically forwarded over an encrypted channel. The ssh program will be put in the background. (This does not work if ssh needs to ask for a password or passphrase; see also the -f option.) -O ctl_cmd Control an active connection multiplexing master process. When the -O option is specified, the ctl_cmd argument is interpreted and passed to the master process. Valid commands are: ``check'' (check that the master process is running), ``forward'' (request forwardings without command execution), ``cancel'' (cancel for- wardings), ``exit'' (request the master to exit), and ``stop'' (request the master to stop accepting further multiplexing requests). -o option Can be used to give options in the format used in the configura- tion file. This is useful for specifying options for which there is no separate command-line flag. For full details of the options listed below, and their possible values, see ssh_config(5). AddressFamily BatchMode BindAddress ChallengeResponseAuthentication CheckHostIP Cipher Ciphers ClearAllForwardings Compression CompressionLevel ConnectionAttempts ConnectTimeout ControlMaster ControlPath ControlPersist DynamicForward EscapeChar ExitOnForwardFailure ForwardAgent ForwardX11 ForwardX11Timeout ForwardX11Trusted GatewayPorts GlobalKnownHostsFile GSSAPIAuthentication GSSAPIDelegateCredentials HashKnownHosts Host HostbasedAuthentication HostKeyAlgorithms HostKeyAlias HostName IdentityFile IdentitiesOnly IPQoS KbdInteractiveAuthentication KbdInteractiveDevices KexAlgorithms LocalCommand LocalForward LogLevel MACs NoHostAuthenticationForLocalhost NumberOfPasswordPrompts PasswordAuthentication PermitLocalCommand PubkeyAuthentication RekeyLimit RemoteForward RequestTTY RhostsRSAAuthentication RSAAuthentication SendEnv ServerAliveInterval ServerAliveCountMax StrictHostKeyChecking TCPKeepAlive Tunnel TunnelDevice UsePrivilegedPort User UserKnownHostsFile VerifyHostKeyDNS VisualHostKey XAuthLocation -p port Port to connect to on the remote host. This can be specified on a per-host basis in the configuration file. -q Quiet mode. Causes most warning and diagnostic messages to be suppressed. -R [bind_address:]port:host:hostport Specifies that the given port on the remote (server) host is to be forwarded to the given host and port on the local side. This works by allocating a socket to listen to port on the remote side, and whenever a connection is made to this port, the connec- tion is forwarded over the secure channel, and a connection is made to host port hostport from the local machine. Port forwardings can also be specified in the configuration file. Privileged ports can be forwarded only when logging in as root on the remote machine. IPv6 addresses can be specified by enclosing the address in square brackets. By default, the listening socket on the server will be bound to the loopback interface only. This may be overridden by specify- ing a bind_address. An empty bind_address, or the address `*', indicates that the remote socket should listen on all interfaces. Specifying a remote bind_address will only succeed if the server's GatewayPorts option is enabled (see sshd_config(5)). If the port argument is `0', the listen port will be dynamically allocated on the server and reported to the client at run time. When used together with -O forward the allocated port will be printed to the standard output. -S ctl_path Specifies the location of a control socket for connection shar- ing, or the string ``none'' to disable connection sharing. Refer to the description of ControlPath and ControlMaster in ssh_config(5) for details. -s May be used to request invocation of a subsystem on the remote system. Subsystems are a feature of the SSH2 protocol which facilitate the use of SSH as a secure transport for other appli- cations (eg. sftp(1)). The subsystem is specified as the remote command. -T Disable pseudo-tty allocation. -t Force pseudo-tty allocation. This can be used to execute arbi- trary screen-based programs on a remote machine, which can be very useful, e.g. when implementing menu services. Multiple -t options force tty allocation, even if ssh has no local tty. -V Display the version number and exit. -v Verbose mode. Causes ssh to print debugging messages about its progress. This is helpful in debugging connection, authentica- tion, and configuration problems. Multiple -v options increase the verbosity. The maximum is 3. -W host:port Requests that standard input and output on the client be for- warded to host on port over the secure channel. Implies -N, -T, ExitOnForwardFailure and ClearAllForwardings. Works with Proto- col version 2 only. -w local_tun[:remote_tun] Requests tunnel device forwarding with the specified tun(4) devices between the client (local_tun) and the server (remote_tun). The devices may be specified by numerical ID or the keyword ``any'', which uses the next available tunnel device. If remote_tun is not specified, it defaults to ``any''. See also the Tunnel and TunnelDevice directives in ssh_config(5). If the Tunnel directive is unset, it is set to the default tunnel mode, which is ``point-to-point''. -X Enables X11 forwarding. This can also be specified on a per-host basis in a configuration file. X11 forwarding should be enabled with caution. Users with the ability to bypass file permissions on the remote host (for the user's X authorization database) can access the local X11 display through the forwarded connection. An attacker may then be able to perform activities such as keystroke monitoring. For this reason, X11 forwarding is subjected to X11 SECURITY extension restrictions by default. Please refer to the ssh -Y option and the ForwardX11Trusted directive in ssh_config(5) for more information. -x Disables X11 forwarding. -Y Enables trusted X11 forwarding. Trusted X11 forwardings are not subjected to the X11 SECURITY extension controls. -y Send log information using the syslog(3) system module. By default this information is sent to stderr. ssh may additionally obtain configuration data from a per-user configura- tion file and a system-wide configuration file. The file format and con- figuration options are described in ssh_config(5).